Automatic Gate

Automatic Gate: TTgate automatic induction door has good compatibility, can connect a variety of control system, from simple manual push button, to more complex automatic ultrasonic type, stickies type sensor or other automatic sen...[Detail]

Automatic Gate:

TTgate automatic induction door has good compatibility, can connect a variety of control system, from simple manual push button, to more complex automatic ultrasonic type, stickies type sensor or other automatic sensor, also can connect to the customer their existing control system, such as fire, computer system and so on.
 
1. Technical characteristics: main power supply: 220-240 v AC / 50 hz 3 million times or more stable performance. Automatic door switch time: 1 ~ 18 seconds (set).
2. Material description: door for high quality plating chromium steel tube (also may according to the customer demand, make stainless steel), 3 mm thick; Door pendulum is 25 * 1.2 mm plating chromium steel tube, built-in HIPS white or transparent dial plate; Post for 48 * 2 m plating chromium steel tube and equipped with polished aluminium cup and aluminum cover; Rail is 40 * 1.5 mm plating chromium steel tube.
3. Can be well and mechanical door and rail/post adaptor, make whole design and store environment one integrated mass.
4. There is an emergency escape device (such as fire, etc.), can set activated alarm and/or make ceiling lights flicker (in the emergency), thus bulletin staff emergency. The door is opened the reverse after for an exit, conform to the fire safety standards.
5. Meet the emergency, can reverse opened the safe passage, but at the moment, dome light shine, buzzer will alarm (also can be in control box on the set to not alarm) to remind relevant working personnel someone back out. Three seconds later revolving door will automatically reply to the closed position. Reverse open the door required torque size can adjust the door body at the bottom of the control box on the potentiometer to achieve (40-120 nm adjustable).
6. The door in the open process such as the resistance, with less than 10 nm drive moment two direction alternation and try to action, such as two direction resistance always exists, the door will eventually stop action and into the state of dormancy, the door must be manually set down 0 degrees or 90 degrees, or closed and opened them again power supply, the door to restart.
7. This function full compliance with European safety standards, when markets (internal) entry direction station have old person or child, the door in the contact resistance, namely will enter "sleep state", and effectively protect sells the guest, in order to avoid door pendulum hit cause disputes.
8. Door body control box can and various trigger connection to realize detect pedestrians automatically open function (mark with microwave automatic sensor, induction distance adjustable), at the same time can be connected safety sensors achieve higher safety requirements (in other similar products without this basic function).
9. The revolving door can choose to install the organic glass full width door, because it increases with the DDA design, can give the disabled provide completely into (convenient) (DDA - the Disability Discrimination Act the Disability Discrimination ordinance)